{multithumb}

The Cisco ® a Cisco VPN client. Therefore are that sustainable Use of cisco rv042 VPN client to gateway setup on the hand: Accordingly our analytical Testing of cisco rv042 VPN client to gateway setup & the many dozens Usersreports are our Experts to unmistakable Schluss came: The numerous Pluses make the purchase extremely easy. Cisco RV042G Configuration Utility Small Business admin Logout About Help RV042G Gigabit Dual WAN VPN Router System Summary Setup DHCP System Management Port Management Firewall VPN Summary Gateway To Gateway Client To Gateway VPN Client Access VPN Passthrough PPTP Server Log Wizard Client To Gateway Add a New Tunnel Tunnel Group VPN Tunnel No. 1 Tunnel Name: Interface: WAN1 WAN2 Enable.

1. Client to Gateway using EasyVPN & Cisco VPN Client JoeteckTipsCisco VPN Client version 5.x.x.0440-k9 & 5.x.x.0410-k9Studio Equipmen.
2. Finding a VPN solution that is right for Client To Gateway Vpn Rv042 you can be challenging. There are a lot of options available and many factors you need to consider before making a decision. In this VPNSecure vs VPN Unlimited comparison, we’re going to compare these two.
3. I set up an RV042 as a VPN gateway for a client a year ago. It is running firmware 1.3.12.19-tm (Feb 13 2009 13:03:21). I created a new certificate. When I download the client certificate, It comes as a.zip file. One the can not be opened by a zip utlity (windows, Winzip or 7 zip). It looks like I can just rename the file to a.pem file, but I.

Introduction

Updated 8/8/12 - Added switch chip info

Doug Reid does most of SNB's VPN router reviews and he always dings products that don't include Gigabit Ethernet ports. So when he reviewed Cisco's last version of its go-to small business VPN router, the RV042 v3, that was among his few complaints.

Well, Doug and other Cisco RV042 fans can finally rejoice because Cisco quietly started shipping a Gigabit version last month, aptly named the RV042G Dual Gigabit WAN VPN Router. If you didn't look closely, you would mistake it for the 10/100 RV042. The only difference is the product name and number subtly screened on the top and front of its black plastic front panel bezel.

Otherwise, the RV042G is the same, measuring around 5' X 8' X 1.5' and with the same lights and ports shown below and power jack on the side. Cisco uses the same graphic for both the RV042 and RV042G in its manuals, so it's good enough for me.

RV042/RV042G front and rear panels

There is still no cooling fan and there are still wall-mount screw slots on the bottom of its grey metal case.

Client To Gateway Vpn Rv042 Settings

Inside

The 042G's board is shown below, with the 042 v3 below it for comparison.

Rv042g Client To Gateway Vpn

RV042G board

Updated 8/8/12 - Added switch chip info

The CPU and switch heatsinks are firmly attached, so I also need info from Cisco to identify the switch. Since a Broadcom BCM52612E 10/100/1000BASE-T Gigabit Ethernet Transceiver is visible, I'm guessing there is a Broadcom 5 port Gigabit switch handling the other five ports, a BCM5387, perhaps? Cisco said it's a Broadcom BCM53125M.

Table 1: RV042G / RV042 v3 component summary

Note that both RV042s have two Mira RAM chips; the other one is on the bottom of the board.

RV042 V3 board

Features

The G's admin GUI provides access to the same feature set that Doug described in his v3 review. The v4.2.1.02 firmware dating from January 2012 has all the IPv6 features Doug described baked in.

Here's a rundown of the RV042G's features:

• DHCP, Static, PPPoE, PPTP, Transparent bridge WAN types
• DHCP server with MAC address reservation and multiple subnets
• VLAN support with multiple subnets (4 port-based, no 802.1q support)
• Dual-WAN with failover and load balance modes
• Many-to-one and one-to-one NAT modes
• Built-in Dynamic DNS client ((DynDNS, 3322)
• Static and dynamic routing
• SPI firewall disable, multicast, WAN ping and IDENT filtering and Proxy, Java, ActiveX and Cooking blocking
• Static port forwarding: 30 single ports or port ranges, no scheduling
• Triggered port forwarding: 30 single ports or port ranges, no scheduling
• 50 schedulable access rules each for IPv4 and IPv6
• Schedulable domain and keyword website blocking
• HTTPS admin access
• Incoming, outgoing, system onscreen log access
• Syslog support
• Email alerts
• Uplink and downlink QoS, priority and bandwidth limit modes
• 50 IPsec site-to-site and 50 client-to-gateway tunnels
• DES, 3DES, AES-128, AES-192, AES-256 encryption
• MD5, SHA1 authentication
• IPSec NAT-T supported for gateway-to-gateway and client-to-gateway tunnels
• 5 PPTP tunnels

A few missing features deserve some highlighting so you don't miss them. Neither the static nor triggered port forwarding features let you specify source and destination ports and L2TP VPNs aren't supported. So you'll need to use either Cisco's free but often-frustrating QuickVPN utility or grab third-party VPN client software such as TheGreenBow instead of using Win 7's built-in VPN options.

I was surprised to find that the RV042G is the only RV0XX series router to not support Cisco's optional ProtectLink Web feature. So you'll need to make do with the domain and keyword blocking features.

Since the G has Gigabit ports, I've shown the port setup screen below. Note that you can force speed to 10 or 100 Mbps full or half duplex. But if you want Gigabit operation, you need to leave the Auto Negotiation box checked (the default). Note also that there are no jumbo frame controls. I didn't check for jumbo frame operation because they aren't really necessary any more with today's computer architectures and network adapters.

RV042G Port Setup

The Firefox admin GUI problems Doug pointed out in his review were fixed long ago and I had no problems accessing the admin interface with Firefox 14. Since Doug didn't provide a lot of admin screenshots in his review, I've put some of the key screens and commentary in the gallery below.

Related Articles

• New To The Charts: Cisco RV042 Dual WAN VPN Router
• Cisco RV082 and RV016 v3 VPN Routers Reviewed